NEMA Type 2, 4 & 13 • UL ENCLOSURE 2, 4 & 13
CSA ENCLOSURE 2, 4 & 13
EN 60529 Degree of Protection IP56
MOMENTARY
DRIP TIGHT • DUST TIGHT • WATERTIGHT • OIL TIGHT
ADVANCED DESIGN HELPS PREVENT ACCIDENTAL ACTUATION
MATERIALS OF CONSTRUCTION:
• Treadle and housing constructed from cast iron for strength and durability
• Protected by a strong cast aluminum shield
• Special AirVal models available to the O.E.M. on special order
• Painted Alert Orange
• Single 3/4”-14 N.P.T. threaded conduit entry is standard
FEATURES & BENEFITS:
• Heavy duty foot switch features an anti-trip treadle mechanism that helps prevent accidental actuation through unintentional stepping on foot treadle
• Switch operation requires that the latch trip lever be released prior to depressing the foot treadle as in-line foot pressure is applied to the latch trip lever located at the rear of the foot treadle
• Smooth trip lever release and treadle depression motion results in good rate of operation
• Dual treadle return springs and latching mechanism
• Anti-skid rubber feet and 3 holes for rigid mounting to floor or equipment
• All Models have a neoprene Cover Gasket plus O-Rings on the Actuating shaft and separate ground screw
OPTIONS:
• Oversize “O” and “OX” Shield models accept oversized safety shoes and metatarsal foot guards. The “OX” Shield has an additional 3/4” (19.1 mm) opening height as compared to the “O” shield
• Special Dual 1/2”-14 N.P.T. threaded conduit entry and metric sizes available to the O.E.M. on special order
• Special Twin & Triple models available to the O.E.M. on special order
• Gated Models available for additional protection
• RF Wireless models are available
|
Warning: This Product can expose you to chemicals including Nickel, which is known to the sate of California to cause cancer and birth defects or other reproductive harm. For more information please visit www.p65warnings.ca.gov
|
Dimensions
SIZE (HxWxD):
|
4.80 x 5.88 x 9.00 in.
|
WEIGHT:
|
7.50 lbs.
|
Agency Approvals |
EN 60529
|
Stage |
Circuit |
Form |
Electrical Ratings |
|
IP56 |
Two
|
SPDT DB
|
Z |
15 A 125-250 VAC 1/2 H.P. 125 VAC
1 H.P. 250 VAC
Heavy Pilot Duty 250 VAC Max.
|
Double Break models must be wired to equal voltage sources and the same polarity. The loads should be on the same sides of the line.
View Data Sheet - Link to data sheet
Replacement Part - 534-U6